mirror of
https://gh-proxy.org/https://github.com/klinsmaya/multica.git
synced 2026-11-08 17:36:45 +08:00
admin-workspace-create2
9
Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
|
da1671ca20 |
MUL-7420: Project workflows — columns and handoffs on the workflow (#8814)
* feat(workflows): workspace workflows with step handoffs (MUL-7420)
A workflow is a named, workspace-level selection of statuses from the
shared status catalog, in board order, with an optional handoff on each
step. Projects opt in through project.workflow_id; a project without one
keeps the whole catalog (the implicit Default workflow), so existing
workspaces see no change.
- issue_workflow table + project.workflow_id, CRUD API under
/api/issue-workflows, POST /api/projects/{id}/workflow with a dry-run
status mapping plan. Only issues on statuses the target workflow does
not list are remapped, and remapping never hands issues off.
- Issue writes keep the status inside the project's workflow. Entering a
step with a handler through a status change assigns the issue to that
handler and starts its run with the step's brief as the handoff note;
an explicit assignee in the same write wins. Creating an issue starts
at the workflow's starting step.
- Task claims carry the issue's project workflow, and the brief renders
a Project Workflow section so agents move along this project's
statuses instead of the built-in ones.
- Statuses a workflow lists cannot be archived.
- Adoption is gated by the project_workflows_v1 flag; existing
workflows keep working and projects can always switch back to Default.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* feat(workflows): workflow settings, project picker and workflow-aware boards (MUL-7420)
- Settings → Workflows (behind project_workflows_v1): the Default
workflow plus named workflows, each shown as its step chain with
handlers and the projects using it; an editor to pick statuses from the
library, order them, mark the starting step, and set each step's
handoff, instructions and next/back statuses.
- Project Workflow property: switching dry-runs first and asks where
issues on unlisted statuses go; nothing else moves and nothing is
handed off.
- A project board's columns are its workflow's steps, and each column
head names who entering it hands the issue to.
- Status pickers offer only the issue's workflow steps and say who each
hands off to; boards refuse drops onto statuses the dragged card's
workflow does not list.
- New issues in a workflow project start on its starting step, with a
hint naming who they will be handed to.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* fix(workflows): name built-in steps once in the brief; roomier picker hints (MUL-7420)
Built-in statuses have no stored name, so the handoff brief printed
`todo` todo. Print the key alone when the name adds nothing.
The status picker widens for workflow projects and shows the handoff as
an arrow and name, so step names no longer truncate to one letter.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* feat(workflows): handoff previews and a single timeline entry per handoff (MUL-7420)
- GET /api/issues/{id}/workflow-handoff?status= says what moving an issue
would do: who it goes to, which runs of its current agent are still
active, and the brief the handler receives. Backs the confirmation.
- POST /api/issue-workflows/preview-brief renders a step's brief from an
unsaved workflow, for the editor's preview.
- Mapping plans list the statuses that stay, so the switch dialog can say
which issues are untouched.
- A handoff is recorded on the status_changed activity (workflow, handler,
whether a run started, the brief) instead of a separate assignee row.
- The brief now reads like the one shown in the design: the workflow, the
current step, its instructions, the statuses, and the commands to hand
off.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* feat(workflows): rebuild the workflow UI to the reviewed design (MUL-7420)
The first cut used generic controls where the design had purpose-built
ones. This brings every surface up to the mockup:
- Settings → Workflows is one page: the workflows (step chain with
handler avatars, handoff count, projects using it; Default first) and,
below, the shared status library with each status's workflow usage.
- The workflow editor is a full page instead of a dialog: draggable step
cards summarising each handoff, and a panel for the selected step —
swap its status, pick the handler with a segmented control and a
searchable target, handoff instructions, next/back statuses, a preview
of the brief the handler receives, duplicate and delete.
- The project Workflow picker lists each workflow's statuses, handoffs and
projects, links to settings, and always confirms the switch with what
moves and what stays.
- Moving an issue into a handoff step (status picker, table, board drop)
asks first: who it goes from and to, a default-on option to stop the
previous agent's run, and the brief.
- Status pickers name the workflow and project, show each step's handler
with an avatar or that the assignee stays, and explain themselves.
- Boards: the handler chip in project column heads, hatched columns a
dragged card cannot enter with the reason, and a drop hint naming who
the card will go to.
- The timeline records a handoff under its status change, with the brief
the run received; the issue sidebar shows the workflow it follows.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* fix(workflows): word a queued previous run as queued in the handoff confirm
The confirm dialog said the previous agent was "still running (for N
minutes)" even when its task had only been queued. Queued runs now read
as queued, and the checkbox cancels them instead of stopping them.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* feat(workflows): refuse a run's status change once the issue left its step
A run decides where the issue goes next from the step it was queued for.
When someone else moved the issue while the run worked, applying that
decision undid their move: in the live Grok run, a PM parked NW-1 as
blocked and the still-running agent moved it straight back to code
review.
Tasks now record the issue's status when they are queued
(agent_task_queue.workflow_step, written by the task INSERTs; automatic
retries keep their parent's step), and a run's own status changes move
it along. In a workflow project, an agent status change from a run whose
step no longer matches the issue is refused with 409
workflow_step_moved, naming where the issue is now and who moved it, so
the agent stops instead of retrying.
A handoff away from a squad now also stops the runs made on the squad's
behalf, and stopped runs record who stopped them.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* fix(workflows): keep every status entry point inside the issue's workflow
The issue context menu listed every catalog status and applied handoff
steps without the confirmation the status picker and board show, so a
right-click could pick a status the workflow refuses or start an agent
unasked. It now offers the workflow's steps and opens the handoff
confirmation through a shared modal.
One-click status actions no longer assume built-in statuses a workflow
may not list: "mark done" lands on the workflow's done step (hidden when
it has none), un-marking a duplicate returns to the workflow's start,
and "mark duplicate" is offered only when the workflow lists cancelled.
The batch toolbar offers a single project's workflow statuses when the
selection sits in one project.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* fix(workflows): keep issue wakeups consistent with workflow steps
Three places where project workflows and issue wakeups met:
- A wakeup run is queued when it fires, so it took the issue's status at
that moment as its workflow step. A wakeup an agent registered then
bypassed the stale-step refusal: parked by a PM, the issue could be
moved on by the agent's "check CI, then hand to review" wakeup. It now
keeps the registering run's step; a member's wakeup still starts from
the issue's status.
- Retries carried handoff_note only for wakeup runs, so a retried
workflow handoff lost its brief. Rows with a workflow step keep it.
- Switching or editing a workflow remaps statuses in bulk without the
close rule, so an issue remapped into a done status kept its wakeups
and pending wakeup runs. The remap now ends them like any status write.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* fix(wakeups): don't also wake the agent a write hands the issue to
A workflow handoff or an assignment already starts the receiving agent's
run. If that agent also subscribed an event wakeup to the issue's status
or assignee, the same write queued a second run for one fact, and
workflows made such writes frequent.
The write now names the agent it hands the issue to in the
transaction-local multica.handed_to_agent (the new agent assignee, a
squad's leader, or a step's handler even when it already owned the
issue), and wakeup capture skips that agent's subscriptions for the
write's issue.* events. Other agents' wakeups, and task, comment and
reaction events, are captured as before.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* feat(workflows): tell agents not to watch workflow issues with wakeups
The handoff brief and the runtime's project workflow section now say
that each step's handler gets a run when the issue enters the step, so
wakeups on a workflow issue are for waiting on time or on something
outside it, not on its status, assignee or runs.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* fix(workflows): refresh project usage after project changes
Co-authored-by: multica-agent <[email protected]>
* feat(workflows): MUL-7420 split columns from per-project handoffs
Workflows now only define a board's columns between a fixed head
(backlog, todo) and tail (blocked, done, cancelled). Handoffs move to
project.workflow_handoffs, so projects can share columns and still hand
off to different people. Default becomes a real, editable row that every
project without a named workflow follows. Adds project handoff, add-column
(project fork or shared) and project brief preview endpoints; same-agent
adjacent columns re-run the agent.
Co-authored-by: Cursor <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* feat(core): MUL-7420 project handoffs and Default workflow client model
Co-authored-by: Cursor <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* feat(views): MUL-7420 column-header handoffs and project workflow menu
Board column headers set the project's handoff for that column; the
project toolbar gets a workflow menu (full flow, switch, templates) and an
add-column action. Views outside a project show Default's columns, with
other statuses reachable through a status filter. Adds the issue flow card,
create-project workflow choice, a columns-only workflow editor and a
lighter status picker.
Co-authored-by: Cursor <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* fix(views): MUL-7420 wrap create-project workflow label in a menu group
Co-authored-by: Cursor <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* feat(workflows): MUL-7420 keep workflow structure in settings; no squad handoffs
Projects no longer add columns or create workflows: the add-column
endpoint is removed and creating a workflow is admin-only. Handoffs go
to one agent, a member or the project lead; squads route work themselves,
so a handoff to one is rejected, as is the issue-creator handler.
Co-authored-by: Cursor <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* refactor(core): MUL-7420 drop the project add-column client
Co-authored-by: Cursor <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* feat(views): MUL-7420 simpler handoff picker and workflow editor form
The handoff form is one searchable "Hand to" picker (no handoff, the
project lead, an agent or a member); the next status defaults to the next
column and next/back overrides sit under "More options". The workflow
editor gets labelled name and description fields and shows the fixed
statuses as one start and one end row. Templates move from the project
menu to Settings → Workflows → New, and the project board loses its
add-column action.
Co-authored-by: Cursor <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* refactor(server): MUL-7420 keep handoffs on the workflow, make backlog and blocked optional
Handoffs move back onto workflow steps: a workflow is the whole pipeline,
and a project only picks one. The project lead stays a relative handler, so
projects can still share a workflow. Handoff edits are admin-only, through
the workflow write or PUT /api/issue-workflows/{id}/handoffs/{status}; the
brief preview moves to the workflow too. Drops the unreleased
project.workflow_handoffs migration.
Todo, done and cancelled are required; backlog and blocked are optional and
keep their fixed places. Without blocked, the brief points agents at the
step's back status.
Co-authored-by: Cursor <[email protected]>
Co-authored-by: multica-agent <[email protected]>
Co-authored-by: Cursor <[email protected]>
* feat(views): MUL-7420 edit handoffs on the workflow, optional backlog and blocked
The workflow editor sets each column's handoff in its side panel, and
Backlog and Blocked switch on and off. The board's column popover and the
flow panel edit the workflow's handoff, say how many projects it reaches,
and are read-only for non-admins. Drops the per-project handoff client
code.
Co-authored-by: Cursor <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* fix(wakeups): MUL-7420 keep platform rules on writes that hand off nobody
Migration 579 skips an issue.* event for the agent a write hands the issue
to. Its filter compared agent_id with the transaction's handed_to_agent
setting using IS DISTINCT FROM, which is false when both are NULL. Main's
platform rules (child_done) have no agent_id, so every issue.* event that
handed the issue to nobody was dropped for them: a parent leaving backlog
never woke its agent for sub-issues that closed meanwhile
(TestChildDoneHeldWhileParentInBacklog).
Rules without an agent are never the handoff target, so they always
capture. Extends TestHandoffDoesNotAlsoWakeTheHandler with a platform rule
on a handoff and on a plain status change; the latter fails on the old
filter.
Co-Authored-By: Claude Opus 5.5 <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* feat(views): MUL-7420 three-way handoff choice; quieter move confirm
The handoff form picks one of three directions, as in the mockup: no
handoff, hand to an agent (starts a run), or hand to a member, project lead
included (assignee only). What the step does, where it goes next and the
back status only reach an agent's brief, so they show and save for agent
handoffs alone.
The board's move confirmation keeps the agent's brief collapsed. Create
project shows the workflow picker even when Default is the only workflow,
with a note on where to make more. The hidden-columns panel says a board's
columns come from its workflow, with a link to manage workflows for admins.
Co-authored-by: Cursor <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* feat(workflows): confirm handoff on project move, per-project handoff copy, two-pane editor (MUL-7420)
- A single issue moved into a workflow project from issue detail confirms
the handoff of the column it lands on; the write opts in with
enter_workflow_step. Batch, API and CLI moves stay administrative.
- The handoff preview takes project_id to preview such a move.
- Saving a shared workflow's handoff from a board can keep the change to
that project: the server copies the workflow for it and switches the
project in one transaction (copy_for_project_id).
- The column popover says which workflow it edits and who else uses it.
- The workflow editor is a step list with a detail panel for the
selected step.
Co-authored-by: Cursor <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* style: gofmt workflow tests
Co-authored-by: Cursor <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* feat(views): MUL-7420 show next/back always; edit workflow name and description in place
Co-authored-by: Cursor <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* feat(views): MUL-7420 trim copy on the workflows settings page
Co-authored-by: Cursor <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* fix: MUL-7420 keep pre-workflow behavior for workspaces that never adopt workflows
The run step guard now applies only to workflows that hand off, and the
standalone Statuses settings page keeps its original header.
Co-authored-by: Cursor <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* fix(views): MUL-7420 use a solid placeholder tone on the workflow header
Co-authored-by: Cursor <[email protected]>
Co-authored-by: multica-agent <[email protected]>
* fix(workflows): keep the runtime brief cache-stable; fix project board and batch status gaps (MUL-7420)
- Move the project workflow out of the runtime brief into the per-turn
prompt so CLAUDE.md stays byte-identical across steps and issues.
- An explicit status filter overrides the project workflow's columns; the
hidden-columns panel lists statuses outside the workflow.
- Batch status offers only statuses every selected workflow allows; a
partial batch rolls back, refetches and warns.
- setProjectWorkflow returns void instead of an unparsed body.
Co-authored-by: Cursor <[email protected]>
Co-authored-by: multica-agent <[email protected]>
---------
Co-authored-by: Claude Opus 5.5 <[email protected]>
Co-authored-by: multica-agent <[email protected]>
Co-authored-by: Lambda <[email protected]>
Co-authored-by: Cursor <[email protected]>
|
||
|
|
b4bfe083be |
MUL-6407: mint UUIDv7 primary keys for append-heavy tables (#7230)
* perf(db): mint UUIDv7 primary keys for the append-heavy tables
Random v4 primary keys scatter every insert across the whole primary-key
B-tree, so each row dirties a different page. On the tables that grow
continuously — the task queue, messages, comments, activity and audit rows —
that is pure write amplification. UUIDv7 puts a big-endian millisecond
timestamp in the leading 48 bits, so consecutive inserts share a page.
The 12 tables converted here are the append-only hot paths:
agent_task_queue, activity_log, inbox_item, comment, issue, chat_session,
chat_message, autopilot_run, webhook_delivery, task_token,
channel_inbound_audit, sys_cron_executions
Ids come from the new pkg/dbid, which returns a pgtype.UUID ready to assign to
a sqlc params struct. Upsert-dominated tables (task_usage, agent_runtime, ...)
are deliberately left alone: v7 only buys locality for rows that are actually
inserted. Lease and claim tokens keep gen_random_uuid() — they must stay
unpredictable and carry no timestamp.
No migration, and no backfill. Every converted INSERT binds its id as
COALESCE(sqlc.narg('id')::uuid, gen_random_uuid()), so the column default stays
reachable: a caller that passes no id inserts exactly as it does today. Tables
will hold a mix of v4 and v7 ids permanently, which the uuid type and every
parser in the repo already accept.
Verification: - pkg/dbid: version/variant, uniqueness, and a non-decreasing timestamp
prefix; a shape test asserting every converted query keeps the COALESCE
fallback; and a source scan asserting every production params literal mints
an id, so a call site added later cannot silently fall back to v4.
- internal/handler: round-trips issue, comment, activity_log, inbox_item,
chat_session, chat_message, agent_task_queue, task_token and
channel_inbound_audit against Postgres and asserts the stored id is v7,
plus one case proving an unset id still inserts (as v4).
- internal/scheduler: covers the one hand-written INSERT, asserting the
execution id is v7 while lease_token stays v4.
Co-authored-by: multica-agent <[email protected]>
* fix(db): address UUIDv7 review feedback
Co-authored-by: multica-agent <[email protected]>
* fix(db): cover Telegram audit UUIDv7
Co-authored-by: multica-agent <[email protected]>
---------
Co-authored-by: Sol-Boy <[email protected]>
Co-authored-by: multica-agent <[email protected]>
|
||
|
|
c3f5df8bf4 |
MUL-5492: fix timeline cap dropping newest entries + stop double-broadcasting descriptions (#6175)
* fix(timeline): cap the issue timeline at the newest end and report the clamp The per-issue timeline cap was applied with ORDER BY created_at ASC LIMIT 2000, so once an issue accumulated more than 2000 comments or activities the cap discarded the NEWEST rows. The timeline appeared to stop at some point in the past and every later event was invisible, with nothing in the response indicating anything was missing. Activity is machine-paced — description autosave, every agent run, status and assignee changes all write rows — so this was reachable in normal use, not only on pathological issues. Take the window with the keyset ordering (created_at DESC, id DESC) in a subquery and re-sort ascending in the outer query. This keeps the chronological contract for every existing caller, including the comment list endpoint that shares ListCommentsForIssue, and is served as an index-only scan by the idx_*_keyset indexes already added in migration 068 — no new migration, no call-site changes. Two things beyond the ordering flip: - Clamp both lists to a shared window floor. The two caps are applied independently, so each list has its own floor. Merging windows with different floors produces a timeline that looks continuous but, below the higher floor, contains only one of the two kinds — e.g. comments with no interleaved activity. That is worse than a timeline that visibly stops, because nothing about it looks wrong. Both lists are now clamped to the newest floor, so the result is a contiguous, correctly interleaved slice. - Stop truncating silently. The unpaginated response is a bare JSON array with nowhere to put a flag, so the clamp is reported via X-Timeline-Truncated and X-Timeline-Window-From, added to ExposedHeaders because a custom response header is otherwise unreadable from browser JS. The legacy wrapped shape's has_more_before is now truthful instead of hardcoded false. Queries read one row past the cap so "hit the cap" is distinguishable from "holds exactly 2000 rows", which would otherwise report a complete timeline as truncated and drag the other list's window down with it. Regression tests cover all four properties and were confirmed to fail against both the original query and a floor-less DESC flip. Co-authored-by: multica-agent <[email protected]> * perf(realtime): stop broadcasting two full descriptions on issue:updated issue:updated carried prev_description alongside the new description in the issue object, and the WS forwarder reuses the producer's payload map verbatim. Every debounced description autosave therefore pushed two full copies of the description to every connection in the workspace, including users who did not have the issue open. The DB write is O(1); the fanout was O(connections x description size), and it repeats on every pause in an editing session. prev_description and prev_title exist only for in-process listeners — subscriber_listeners adds newly @mentioned users, notification_listeners builds mention notifications, activity_listeners records the title change. No client reads them: IssueUpdatedPayload in packages/core/types/events.ts does not declare either field. Project the payload on the way out. The bus dispatches bus.Subscribe handlers before the SubscribeAll forwarder, so the in-process consumers are unaffected, and projecting at the forwarder covers both the single- node Hub and the Redis relays since that is where the frame is serialized. The producer's map is copied rather than mutated. The removed keys are listed in a table rather than an if on one event type. The bug was structural, not a typo: the next large field added to a published payload inherits the same cost silently, and a declarative list puts the internal/external payload boundary in one reviewable place. issue.description itself is deliberately kept — clients apply it to their cache, so stripping it would trade fanout bytes for N refetches. Cutting the remaining fanout needs the per-issue scope routing already scaffolded server-side for MUL-1138, which is blocked on the client sending subscribe frames. Tests assert both halves: the keys are absent from the serialized frame, and the in-process listener still receives them. Co-authored-by: multica-agent <[email protected]> * fix(timeline): keep comment threads whole under the newest-N cap Review found that the newest-N window can orphan a reply, and an orphaned reply is invisible rather than merely mis-nested: the timeline builds its top level from "activities + comments with no parent_id" and renders replies by looking them up under their parent, so an orphan sits in the map with no card to render it. MUL-1847 / #2263 was exactly this shape — 1 root + 29 replies, root dropped, all 29 vanished from the UI while the API returned them. Root cause of the regression: capping with the OLDEST n could never orphan anything, because a reply is always newer than its parent, so a prefix of the timeline is closed under "parent of". A newest-n window is a suffix and has no such property. Flipping which end the cap bites silently invalidated a structural property the comment tree relies on. Two changes. Drop the cross-kind clamp. The previous revision trimmed both lists to a shared floor so the window was provably contiguous. That was the wrong trade and it was also the dominant source of orphans. Comments are human-paced (p99 ~30, max ever observed ~1.1k) and essentially never reach the cap, while activity is machine-paced and reaches it routinely — so the shared floor was almost always the activity floor deleting comments that had been fetched successfully and would have rendered fine. On an issue with thirty comments it was pure loss. Each list now reports its own truncation and X-Timeline-Truncated names which kinds were affected. Not clamping costs only activity density in the older part of the range, which is metadata rather than content, and it is reported rather than hidden. Complete parent chains for the case that remains — comments themselves exceeding the cap. ListMissingAncestorComments walks parent_id upward via a recursive CTE and returns the ancestors not already held; the handler merges them and restores the ascending order. This only ever ADDS rows, so unlike clamping it cannot hide anything the caller would have seen, and it is bounded by the number of distinct missing ancestors. Whole- thread windowing was considered and rejected: a single thread can exceed any row budget, so its degradation is not definable. Applied to the shared query's default list path too, not just the timeline. foldResolvedThreads documents a COMPLETE-thread set as its precondition and comment.go asserts the default list mode satisfies it; a half thread made that assertion false and a resolved thread whose root was cut stopped folding correctly. Also drops X-Timeline-Window-From. It was second-precision RFC3339 while the real ordering key is (created_at, id) at full precision, so it could not resume a read without skipping or repeating rows inside a shared second. A resumable cursor should be opaque and carry both halves; worth designing when there is a consumer rather than shipping as a lossy approximation. Tests: the reviewer's exact scenario, plus a no-orphaned-replies invariant on both endpoints, the fold-still-works case, and a guard that activity truncation does not delete comments. Each was confirmed to fail with the fix disabled. TestListTimeline_JointWindowHasNoOneSidedRegion was rewritten rather than deleted — it pinned the clamp behaviour being abandoned here, so leaving it would lock in the wrong contract and deleting it would drop the coverage. Co-authored-by: multica-agent <[email protected]> * fix(comments): bound parent-chain completion and stop folding partial threads Second review round on MUL-5492. Four must-fixes, all stemming from one conflation: parent-chain closure, a newest-N window, and a complete thread are three different things. Closure makes a reply renderable; it does not license thread-level derivations. Do not fold a truncated read. fetchCommentsForList closes parent chains, but older siblings and descendants of a retained reply stay outside the window, so the set holds partial threads. Folding them produced wrong answers rather than incomplete ones: a resolution reply outside the window made a resolved thread look unresolved, and folded_count reported a total derived only from retained replies. The previous revision claimed closure restored foldResolvedThreads' COMPLETE-thread precondition; it did not, and that claim is removed. --recent and untailed --thread still return whole threads and still fold. Bound the walk. The recursive CTE climbed to the root with no depth limit, so a deep chain could drag its entire ancestry back and defeat the row cap it was meant to preserve. Depth is genuinely unbounded in stored data: the general write path stores the exact comment being replied to (only the agent path collapses to the thread root), so chains can run far deeper than the two levels the UI renders. Replaced with a layered walk under explicit budgets — 2000 extra rows, 64 levels — making a response provably bounded by 4000 comments, or 6000 timeline entries with activities. Scope every level to the tenant. The CTE's recursive branch matched on parent_id alone. parent_id carries a foreign key to comment(id) but not to a matching issue, so a stray cross-issue parent reference is representable, and the walk would have followed it into another issue's comments. The replacement filters issue_id and workspace_id on every level. A negative test confirms the leak: with the filter removed it reports "a comment from another issue leaked into this issue's response". Degrade by pruning, not by orphaning. When a budget is exhausted, a parent row is missing, or a parent is out of scope, keepRootConnected drops the affected comments instead of returning replies the UI cannot render. Dropping a node also drops its descendants, since their chains run through it. Returning fewer new replies is conservative and already signalled as a truncated read; leaking another tenant's data, returning an unbounded response, or emitting invisible orphans are all worse. Also: probe read on the comment list so exactly-2000 is not misreported as truncated, which would needlessly suppress the fold; CommentsTruncated is carried on fetchCommentsResult rather than inferred from the result length, which is meaningless once completion adds rows. The new query returns db.Comment directly instead of a hand-copied row, which is how quick_action_id came to be dropped after the rebase — a backfilled quick-action root would have rendered as a raw prompt. Corrected three inaccurate comments: the "index-only scan" claim (the index avoids the sort but does not cover SELECT *), the "write path collapses replies to root" claim, and a test header still describing the abandoned contiguous-window behaviour. Tests cover exactly-at-cap still folding, truncated reads not folding (both reply-resolved and root-resolved), depth beyond budget pruned not orphaned, shared ancestors fetched once, cross-issue parents never crossing the boundary, and quick_action_id surviving backfill. Each was confirmed to fail with its specific fix disabled; the reply-resolved fold test was reshaped after the first version passed for the wrong reason. Co-authored-by: multica-agent <[email protected]> * fix(timeline): preserve complete threads under comment cap Co-authored-by: multica-agent <[email protected]> * fix(comments): preserve newest bounded views Co-authored-by: multica-agent <[email protected]> --------- Co-authored-by: Eve <[email protected]> Co-authored-by: multica-agent <[email protected]> |
||
|
LinYushen
|
0cb759b446 | fix(squad): suppress no-action leader comments (#2583) | ||
|
Bohan Jiangandmultica-agent
|
3f20999597 |
refactor(timeline): drop server-side comment + timeline pagination (#2322)
* refactor(timeline): drop server-side comment + timeline pagination (MUL-1929) The cursor-paginated /timeline and /comments endpoints were sized for a problem the data shape doesn't have: prod p99 is ~30 comments per issue and the all-time max is ~1.1k. Time-based pagination also splits reply threads across page boundaries (orphan replies), which the frontend was papering over with an "orphan rescue" that promoted disconnected replies to top-level — confusing UX with no real benefit. Replace both endpoints with a single full-issue fetch, capped server-side at 2000 rows as a defensive safety net (never hit in practice). Server - /api/issues/:id/timeline now returns a flat ASC TimelineEntry[] (matches the legacy desktop contract — older Multica.app builds keep working because the wrapped TimelineResponse + cursors are gone, and the raw array shape was always what they consumed). - /api/issues/:id/comments drops limit/offset; only ?since is honoured for the CLI agent-polling flow. - Drop ListCommentsBefore/After/Latest, ListActivitiesBefore/After/Latest and the timelineCursor encoding. - Replace with ListCommentsForIssue / ListCommentsSinceForIssue / ListActivitiesForIssue (capped by argument). CLI - multica issue comment list drops --limit / --offset and the X-Total-Count reporting; --since is preserved for incremental polling. Frontend - Replace useInfiniteQuery with useQuery in useIssueTimeline; drop fetchOlder/Newer, jumpToLatest, isAtLatest, newEntriesBelowCount. - Remove timeline-cache helpers (mapAllEntries / filterAllEntries / prependToLatestPage) and the TimelinePage / TimelinePageParam types. - WS event handlers update the single flat-array cache directly. - Drop the orphan-reply rescue in issue-detail — every reply's parent is now guaranteed to be in the same array. - Strip the "show older / show newer / jump to latest" buttons and their i18n strings. Co-authored-by: multica-agent <[email protected]> * fix(timeline): address review feedback on pagination removal Three issues caught in PR #2322 review: 1. /timeline broke for stale clients between #2128 and this PR. They send ?limit/?before/?after/?around and parse with the wrapped TimelinePageSchema; the new flat-array response was failing schema validation and falling back to an empty timeline. Restore the wrapped shape on those query params (DESC entries, null cursors, has_more_*=false), keeping the flat ASC array for bare requests. Around-mode now also fills target_index from the merged slice so legacy clients can still scroll-to-anchor without a follow-up. 2. The agent prompts in runtime_config.go and prompt.go still told agents that `multica issue comment list` accepts --limit/--offset and to use `--limit 30` on truncated output. With those flags removed in this PR, new agent runs would hit "unknown flag" or skip context. Update the prompt copy to "returns all comments, capped at 2000; --since for incremental polling". 3. useCreateComment's onSuccess was a bare append to the timeline cache with no id-dedupe, so a fast comment:created WS event firing before onSuccess produced a transient duplicate. Restore the id guard the old prependToLatestPage helper used to provide. Adds two new boundary tests: - TestListTimeline_LegacyWrappedShape_OnPaginationParams - TestListTimeline_LegacyWrappedShape_AroundFillsTargetIndex Co-authored-by: multica-agent <[email protected]> * test(handler): fix timeline test assertions for handler-package isolation The TestListTimeline_* assertions assumed CreateIssue would seed an "issue_created" activity_log row, but the activity listener that publishes those rows is registered in cmd/server/main.go — handler-package tests don't wire it up. CI saw 5 entries (3 comments + 2 activities) where the test expected ≥6. Drop the auto-activity assumption: assert exactly 5 entries in TestListTimeline_MergesCommentsAndActivities, and tighten TestListTimeline_EmptyIssue to assert a fully-empty timeline. Co-authored-by: multica-agent <[email protected]> --------- Co-authored-by: multica-agent <[email protected]> |
||
|
Naiyuan QingandClaude Opus 4.7
|
ba147708a6 |
fix(timeline): cursor-paginated timeline to stop long-issue freeze (#1968) (#2128)
* fix(timeline): cursor-paginated timeline to stop long-issue freeze (#1968) Opening an issue from Inbox with thousands of timeline entries used to hard-freeze the browser tab on a synchronous render of every comment + activity. The whole pipeline was unbounded: the API returned every row, TanStack Query cached the full array, and IssueDetail mounted N CommentCards (each running a full react-markdown + lowlight pipeline) in one frame. This swaps the timeline endpoint to keyset cursor pagination and rewires the frontend to useInfiniteQuery so a long issue costs the same as a short one on first paint. API: - GET /issues/:id/timeline now accepts ?before / ?after / ?around (mutex) + ?limit (default 50, max 100); response wraps entries with next/prev cursors and has_more flags. Cursors are opaque base64 (created_at, id). - ?around=<entry_id> anchors a window on the target so Inbox notifications pointing at an old comment never trigger the freeze. - New composite indexes on (issue_id, created_at DESC, id DESC) replace the redundant single-column ones so keyset queries are index-only scans. - /issues/:id/comments default branch now caps at 50 instead of returning every row unbounded; the unbounded ListComments / ListActivities sqlc queries are deleted. Frontend: - useIssueTimeline switches to useInfiniteQuery, exposes fetchOlder/fetchNewer/jumpToLatest + isAtLatest + newEntriesBelowCount. - WS handlers respect the at-latest invariant: comment/activity:created prepends to pages[0] only when the user is reading the live tail; otherwise it just bumps a counter so the UI offers a "Jump to latest" affordance without yanking scroll. - Optimistic mutations adapted to the InfiniteData shape via shared helpers (mapAllEntries / filterAllEntries / prependToLatestPage in core/issues/timeline-cache.ts) and use setQueriesData so all open windows of the same issue stay in sync. - IssueDetail Activity section gets a TimelineSkeleton placeholder during the brief load window plus subtle text-link load-more buttons matching the existing Subscribe affordance (no Button chrome). Top uses a divider for boundary clarity; bottom shows "Jump to latest · N new" weighted slightly heavier when there's unread state. - highlightCommentId now flows into the hook's around parameter so Inbox jumps fetch the surrounding 50 entries directly. Co-Authored-By: Claude Opus 4.7 (1M context) <[email protected]> * chore(agent): default comment list to 50 + prompt hint about long issues The CLI's "multica issue comment list" used to default to --limit 0 (meaning "fetch every comment"), which lets an agent on a long issue fill its context window with thousands of rows. The default is now 50; agents that need older history can pass --limit or --since explicitly. The local-coding-agent prompt also gains a single-line note about this in both the comment-triggered and on-assign flows so the agent knows to scope its fetches when issue size is unknown. Autopilot run-only mode is intentionally unchanged — it has no issue context to query. Co-Authored-By: Claude Opus 4.7 (1M context) <[email protected]> --------- Co-authored-by: Claude Opus 4.7 (1M context) <[email protected]> |
||
|
Jiayuan ZhangandClaude Opus 4.6
|
cce210ed3a |
feat(assign): sort members & agents by user's assignment frequency (#652)
The Assign dropdown now sorts members and agents by how frequently the current user assigns issues to them. Frequency is computed from two sources: assignee_changed activities in the activity log and initial assignments on issues created by the user. Co-authored-by: Claude Opus 4.6 (1M context) <[email protected]> |
||
|
Naiyuan QingandClaude Opus 4.6
|
b2ee151306 |
fix(activity): address code review feedback and improve timeline UX
- Extract shared timeAgo utility, remove duplicates from comment-card and issue-detail - Remove unused replies prop from CommentCard - Fix recursive delete to remove all descendant replies, not just direct children - Improve formatActivity with human-readable status/priority labels and actor names - Validate parent comment exists and belongs to same issue before creating reply - Add priority_changed activity recording in activity listeners - Fix activity SQL query to sort ASC (was DESC, then re-sorted in handler) - Fix reply-input layout alignment and test submit button selector - Minor: .gitignore additions, button dark mode aria-expanded fix Co-Authored-By: Claude Opus 4.6 (1M context) <[email protected]> |
||
|
Jiayuan ZhangandClaude Opus 4.6
|
1e61c1974c |
feat(server): implement full REST API with JWT auth and real-time WebSocket
- Add HTTP handlers for issues, comments, agents, workspaces, inbox, members, and activity - Implement JWT authentication middleware with Bearer token validation - Add sqlc queries for all entities (CRUD operations) - Extract router into reusable NewRouter() for testability - Expand SDK with full API client methods (CRUD for all resources) - Add updateWorkspace to SDK, add Member type to shared types Co-Authored-By: Claude Opus 4.6 <[email protected]> |